The code block below illustrates how one might use # and // as comments in your logic and calculations.

This value you provided is not a number. Please try again.

This value you provided is not an integer. Please try again.

The value entered is not a valid Vanderbilt Medical Record Number (i.e. 4- to 9-digit number, excluding leading zeros). Please try again.

The value you provided must be within the suggested range

The value you provided is outside the suggested range

This value is admissible, but you may wish to double check it.

The value entered must be a time value in the following format HH:MM within the range 00:00-23:59 (e.g., 04:32 or 23:19).

This field must be a 5 or 9 digit U.S. ZIP Code (like 94043). Please re-enter it now.

This field must be a 10 digit U.S. phone number (like 415 555 1212). Please re-enter it now.

This field must be a valid email address (like joe@user.com). Please re-enter it now.

The value you provided could not be validated because it does not follow the expected format. Please try again.

Required format:

R8uXPwCEoyNfiUiNb23KpCXJcT

Project: ACE-IT Binaxnow Quiz & Training Feedback

Thank you for coming to the Project: ACE-IT BinaxNow & STRAC App training. We hope you found it useful and engaging.

If you want to take the next steps toward certification as a BinaxNow test administrator or proctor, in addition to answering the 10 true/false quiz questions, you must include your first and last name, plus your organization so that we can identify you.

We also welcome feedback on the training in general, so please respond to the several additional questions after the quiz. If you wish to do this part anonymously, you may submit a second survey answering only the questions at the end.

Date of virtual training

* must provide value

M-D-Y

First name

Last name

County

Bucks County

Chester County

Delaware County

Montgomery County

Philadelphia

Another county/state

reset

County/state

Organization

Occupation

* must provide value

Other occupation

Title and/or role in Project: ACE-IT

For testing patient direct nasal swabs, hold Extraction Reagent bottle vertically, hovering 1/2 inch above the TOP HOLE and slowly add 8 DROPS to the TOP HOLE of the swab well.

True

False

reset

The CORRECT answer is FALSE.

You must only use 6 drops of reagents.

If you have any further questions or need clarification, please write in the field to the right.

The BinaxNOW COVID-19 Ag Card device should not be removed from the foil pouch until just before use.

True

False

reset

The CORRECT answer is TRUE.

The BinaxNOW� COVID-19 Ag Card device should not be removed from the foil pouch until just before use. Do not open pouch until you are ready to perform the test.

If you have any further questions or need clarification, please write in the field to the right.

A nasopharyngeal swab is an acceptable sample type for testing on the BinaxNOW COVID-19 Ag Card.

True

False

reset

The CORRECT answer is FALSE.

You must use a swab from the anterior nostrils. Do not use a nasopharyngeal swab or saliva for this test.

Remember the swab must be inserted into the 1st nostril until you cannot see the foam tip and rotated against the interior wall of the nostril with more drainage or that is more congested for ~10-15 seconds. Then you must repeat this in the 2nd nostril using the same swab.

If you have any further questions or need clarification, please write in the field to the right.

Direct nasal swab samples may be stored at room temperature for 24 hours.

True

False

reset

The CORRECT answer if FALSE.

Once the nasal swab has been obtained you must use it immediately to do the test. The sample cannot be stored at any temperature. If you are unable to complete the test within 15 minutes, you should discard the swab and obtain another sample when you can do the test immediately.

If you have any further questions or need clarification, please write in the field to the right.

It is acceptable to return the nasal swab after patient collection to its original packaging.

True

False

reset

The CORRECT answer is FALSE.

Once the nasal swab has been obtained you must use it immediately to do the test. The swab cannot be placed back into its sterile paper pouch. If you need to set the swab down for a moment, use a clean specimen cup or test tube.

If you have any further questions or need clarification, please write in the field to the right.

False negative results can occur if the sample swab is not rotated (twirled) prior to closing the card.

True

False

reset

The CORRECT answer is TRUE.

Once the swab has been placed into the card, it must be twirled three times before the card is closed and you begin timing the reaction. This allows the nasal secretions to mix with the reagent, which is necessary to get an accurate test. If you fail to twirl the swab, you may get a false negative test result.

If you have any further questions or need clarification, please write in the field to the right.

If no lines are seen, or if just the Sample Line is seen, the assay is negative.

True

False

reset

The CORRECT answer is FALSE.

If you see either no lines or just a line next to the word "sample" the test is invalid. There must be a pink line at the top of the window next to the word "control" for the test to be valid.

If you have any further questions or need clarification, please write in the field to the right.

Results should be read promptly at 15 minutes, and not before. Results should not be read after 30 minutes.

True

False

reset

The CORRECT answer is TRUE.

The test must be read no earlier than 15 minutes and no later than 30 minutes after you have closed the card.
If you read the card before 15 minutes or after 30 minutes your result may be incorrect.

If you have any further questions or need clarification, please write in the field to the right.

The appearance of a pink-to-purple Control Line and a pink-to-purple Sample Line below it is a positive result.

True

False

reset

The CORRECT answer is TRUE.

A positive test occurs when there are two pink lines in the window at 15 minutes.

If you have any further questions or need clarification, please write it in the field to the right.

Test using only with swabs provided in the kit, and collect direct nasal swabs from individuals suspected of COVID-19 by their healthcare provider within the first seven days of symptom onset.

True

False

reset

The CORRECT answer is TRUE.

You must use the swabs provided in the test kit and the test can only be performed on someone who is either asymptomatic (assurance testing) or has had symptoms for fewer than 8 days (symptomatic testing).

If you have any further questions or need clarification, please write in the field to the right.

Additional questions & comments

Expand

WebEx platform: Ease of use

Difficult to use

Not very easy to use

Neutral

Easy to use

Very easy to use

reset

WebEx platform: Quality of experience

Terrible quality

Not such great quality

Neutral

Solid quality

Great quality

reset

Introduction & Overview (select multiple answers if accurate)

I didn't learn very much because information lacked clarity

I learned a few new things

Information was consistent with what I already know

I heard a lot of new information but I'm not sure I understand it very well yet

I learned a lot of new information, explanations were clear, and I understand what was communicated

BinaxNow Test (select multiple answers if accurate)

I didn't learn very much because information lacked clarity

I learned a few new things

Information was consistent with what I already know

I heard a lot of new information but I'm not sure I understand it very well yet

I learned a lot of new information, explanations were clear, and I understand what was communicated

STRAC App (select multiple answers if accurate)

I didn't learn very much because information lacked clarity

I learned a few new things

Information was consistent with what I already know

I heard a lot of new information but I'm not sure I understand it very well yet

I learned a lot of new information, explanations were clear, and I understand what was communicated

Comments & ideas for improvement

Expand

You have selected an option that triggers this survey to end right now.

To save your responses and end the survey, click the 'End Survey' button below. If you have selected the wrong option by accident and/or wish to return to the survey, click the 'Return and Edit Response' button.